Drilling, Milling and Dowel Insertion Center composed of:
- ESSE2 transversal automatic loader
- BIESSE FTT with 4 drilling and milling heads with automatic bit change
- Tipper
- BIESSE FTT with 2 drilling and milling heads with automatic bit change
- BIESSE FHT for horizontal drilling and dowel insertion
- ESSE2 transversal automatic unloader
TECHNICAL DATA:
WORKABLE PANELS
• Panel length (min-max): 240 - 3.200 mm
• Single panel width (min-max): 140 - 1,550 mm
• Panel width (min-max): 140 - 800 mm
• Panel thickness (min-max): 12 – 60 mm
• Drilling heads consisting of:
- Nr. 14 independent spindles for vertical drilling in the "X" direction;
- Nr. 18 independent spindles for vertical drilling in the "Y" direction;
- Nr. 3 independent spindles with double output for horizontal drilling in the "X" direction;
- Nr. 3 independent spindles with double output for horizontal drilling in the "Y" direction.
• Revolver magazines with 56 positions each, for the automatic tool change of the tips of the vertical spindles;
• Nr. 1 3.7 Kw (5 HP) electrospindle with ISO 30 connection complete with:
- Inverters
- 3-position rack for tool change.
• Nr. 1 3.7 Kw (5 HP) electrospindle with ISO 30 connection complete with:
- Inverters
- 3-position rack for tool change.
• Nr. 2 workstations on each machine for working in duplicate of 2 identical or specular panels
- 90 m3/h vacuum pump.
- Chip conveyor belt
- Perimeter security protections
- Machine according to CE standards
