CNC machining centre MASTERWOOD PROJECT TF 100

Year of manufacture 2017
Working dimension Y 1.000 mm
Working dimension Z 60 mm
Number of milling spindles 1
Main motor power 3,3 kW
Rotation speed max 18.000 rpm
Tool clamping system ISO 30
Tool changer positions 4
Vertical drilling spindles 10
Horizontal drilling spindles in X 4
Horizontal drilling spindles in Y 2
Groove saw in X-direction
Machine table Feed-through technology
Special workpiece clamping system clamp gripper
Interface for .dxf data
Safety device enclosed cabin
Control MASTERWOOD CN PC
Software MASTERWOOD MASTERCABINET, MASTERWOOD MASTERWORK MW310, MASTERWOOD MASTERWORK
Weight 1.190 kg
CE marking
Space required Length 2.800 mm
Space required Width 1.800 mm
Space required Height 1.400 mm
The computer was replaced at the end of 2022, since then the machine has only run for approx. 93h (see photos), so one could assume that the machine has probably not run much in the past.

Accessories/scope of delivery:
-shown tools, drills right and left running etc. (no guarantee of 100% completeness, as the operation is still running)
-including roller conveyor at the inlet and outlet

Unless expressly stated, tools, tool holders, aggregates, and mechanical clamps, which may be shown in photos and videos, are not part of the scope of delivery.
https://www.hoechsmann.com/15460
2024-01-08 09:11:31