Designed for calibrating and finishing solid wood board and veneers in one pass,
Fitted with powered jacks at the base of the machine allowing the machine to be raised or lowered when used in line.
The machine is in very good condition.
Pneumatic adjustment to the top pressure bar, very good condition feed mat, floating table for use when sanding veneers, powerful motors, two helical grooved rubber coated callibrating rollers followed by a pad and then a blower to clear the grain of the wood.
Mechanical digital readout for the working thickness,
Blowers on each sanding belt to clear the belt,
Taster device,
Rotating brush fitted under the feed mat to clean belt,
Vacuum hold down table,

Technical Specification:

Model                                 TKKS 1300
Serial number                         93034817
Number of sanding belts               3
Head configuration

Two helical grooved rubber coated callibrating rollers followed by a pad

1st motor power  roller               25hp
2nd motor power  roller               25hp
3rd pad                               20hp
                                
Max width of board                    1300mm
Max opening                           110mm
Belt dimensions                       2620x1340mm
Feed speed (variable)                 2-18m/min
Calibrating roller dia                270mm
Rise and fall of table                powered
Main extraction outlet                400mm dia
Blowing unit extraction               120mm dia
Overall dims                          2400x2600x2300mm